Line drawing of a power transformer in a substation structure

KNIFE SWITCH

Offload Isolation Knife Switches

Complete assemblies for isolation under offload conditions, in single-pole and double-pole configurations.

SINGLE-POLE & DOUBLE-POLE

Offload Isolation Knife Switches

JJ ENTERPRISE manufactures complete offload isolation knife switch assemblies for electrical installations requiring isolation under offload conditions. The switches are available in single-pole and double-pole configurations to suit installation requirements.

Our offload isolation knife switch assembly has been type tested for short-circuit withstand at 50 kA and 25 kA for 1 second.

Available Ratings & Configurations

  • Rated voltage: 1.1 kV
  • Current ratings: 1000 A, 1250 A and 2000 A
  • Configurations: Single-pole and double-pole
  • Supply: Complete knife switch assembly
  • Custom ratings: Can be designed, manufactured and tested to customer requirements

Short-Time Current Testing at ERDA

JJ ENTERPRISE’s 1.1 kV, 2000 A per pole, double-pole offload neutral isolation knife switch sample underwent short-time current testing at the Electrical Research and Development Association (ERDA), Vadodara.

An ERDA report shows an average test current of 25.3 kA for 1 second. No abnormality was observed, the contacts did not weld, and the switch opened on the first attempt following the test.

For standard or custom requirements, share your voltage rating, current rating and required pole configuration with JJ ENTERPRISE.

Double-pole offload isolation knife switch assembly with two operating handles
Double-pole
Single-pole offload isolation knife switch assembly with the operating handle in the off position
Single-pole
Open style off-load knife switch with the blade and hand crank exposed
Open style

ERDA TEST REPORTS

Short-time current testing

ERDA short-time current test report for a 1.1 kV, 2000 A double-pole offload neutral isolation knife switch

ERDA REPORT

1.1 kV, 2000 A double-pole switch

An ERDA report shows an average test current of 25.3 kA for 1 second. No abnormality was observed, the contacts did not weld, and the switch opened on the first attempt following the test.

ERDA short-time withstand current test report for a 1.1 kV, 1250 A neutral isolation switch

ERDA REPORT

1.1 kV, 1250 A neutral isolation switch

A 1.1 kV, 1250 A neutral isolation switch, manufactured by JJ ENTERPRISE for a customer, underwent short-time withstand current testing at the Electrical Research and Development Association (ERDA). The ERDA report identifies JJ ENTERPRISE as the manufacturer and shows a rated short-time withstand current of 50 kA RMS for 1 second. The report confirms that the sample conformed to the short-time withstand current test requirements specified by the customer.